Overslaan naar inhoud
Vulmiddel - vulpoeder voor laservloeistof

Prijs:

1,67 €

Vulmiddel - vulpoeder voor laservloeistof

https://www.westfalia-shop.nl/web/image/product.template/94393/image_1920?unique=2b8b9a5
0 beoordeling
14 verkocht in laatste 24 uren
UVP: 2,00 € -17%

1,67 € 1.67 EUR 1,67 € Betaal nu 0,56 € met Klarna

1,99 € 1,65 €

(0,00 € / Stuks)
* incl. btw,   excl. Verzendkosten

8 mensen bekijken dit op dit moment

0,08 € Cashback met deze aankoop · 5 %
Op voorraad
Info over dit artikel:
  • WESTFALIA vulstof voor Laserfluid – veelzijdig inzetbaar
  • Temperatuur- en chemicaliënbestendig – extreem duurzaam
  • Waterdicht materiaal – voor duurzame reparaties
  • Ideaal voor het vullen van scheuren – eenvoudige toepassing
  • Bewerkbaar na uitharding – schuren en schilderen mogelijk
Veilig afrekenen
Gegarandeerd Veilig afrekenen
Artikelnummer WF-991970
Merk Westfalia

  • Replaces any filler
  • Temperature and chemical resistant
  • Waterproof

In conjunction with our WESTFALIA superglue for bonding and filling cracks, breaks, joints, gaps, and holes, as well as for bridging, reinforcing, modeling, and fastening.

Replaces any filler without the need for time-consuming mixing and long curing times. Waterproof, temperature and chemical resistant. Can be machined, sanded, drilled, and painted after curing.

Application: Apply laser fluid and filler alternately, in layers (approx. 2 mm at a time). Do not mix! The adhesive reacts immediately with the filler.

Ensure the filler is thoroughly wetted with our WESTFALIA superglue.

Small bonding joints can be easily reinforced with this application (chemical weld).

Tip: Cover the holes and corners to be filled with adhesive tape to form a frame.

  • 1. Before treating with acetone, thoroughly clean the surfaces to be treated and remove any adhesive residue. The bonding joints must fit precisely, be clean, and free of grease.
  • 2. If you have to repair extremely broken joints, first place waxy paper (e.g., baking paper, PE, PP) under the joint. Then fill the broken joint with the granules. Make sure that the filler does not exceed 2 mm.
  • 3. In the third step, soak the granules with the adhesive. This generates heat! Do not inhale vapors and gases. Ventilate the work area sufficiently before, during, and after use.
  • 4. Curing time depends on the material. After approximately 15-60 minutes, you can drill, sand, or paint over the material. The adhesive is transparent and flexible, so it can be used for household items (shoe soles) or jewelry. You'll always have crystal-clear adhesive joints.

Contents: 30 g

Weight
Weight 30 g
Naam EU-verantwoordelijke: HAJUS AG; Hr. Stanislav Maer
EU-verantwoordelijke straat: Lise-Meitner-Straße
EU-verantwoordelijke Huisnummer: 7
Postcode EU-verantwoordelijke: 30926
EU-verantwoordelijke gemeente: Seelze
EU-verantwoordelijk land: Germany
EU-verantwoordelijke e-mail: [email protected]
EU-verantwoordelijk telefoonnummer: +49 5151 87798 10
GPSR bijlage: Downloaden
Dit kan u ook interesseren
Recently Viewed