Vito WW ECOplus (8.4 kW) cream wood-burning stove, fine dust filter, continuous burning, automatic, external air supply, hot water

Fire and water in harmony. The water-bearing stove combines the advantages of both elements and, thanks to its integrated hot water tank, optimally complements your home heating system. This is achieved technically by installing a so-called water tank around the combustion chamber, in which the circulating water is heated and then fed into a buffer tank for domestic and heating water. This not only prevents overheating of the rooms in which it is installed, but also utilizes a large portion of the heat generated by the stove throughout the entire house. While enjoying the cozy, warm atmosphere of the stove, you not only reduce your heating costs; the outside world also benefits from the efficient and gentle combustion technology.

Visually, the water-bearing stove is indistinguishable from conventional steel stoves. Thanks to modern ECOplus technology, including a fine dust filter, pollutants in the exhaust gas are reduced to a minimum. The continuously adjustable automatic system ensures convenient operation of the fireplace and optimal combustion. You'll enjoy a high level of comfort even when burning for hours:

Continuous burning

The fireplace is tested for continuous burning. Equipped with anthracite-nut 3 coal or anthracite briquettes, the fireplace can heat your living space for several hours, even at night, and remain in operation without the need to add new fuel.

External combustion air supply

It is possible to use a room-air-dependent fireplace to draw the required combustion air directly from outside. If there are negative pressure ventilation systems in the house, additional measures may be necessary; these must be coordinated with the chimney sweep or ventilation system installer.

Automatic operation

The combustion air supply is automatically regulated via a capillary sensor depending on the convection heat. The set heat output is automatically maintained during the combustion of a fuel load.

Water-conducting

With a built-in water heat exchanger, the stove is able to efficiently support the central heating system in the provision of domestic water and conventional heating.

Technical data

• Continuous burning/intermittent burning: Continuous burning

• Nominal heat output: 8 kW

• Total heat output: 8.4 kW

• Water heat output: 5.1 kW

• Air heat output: 3.3 kW

• Design: A1

• Room heating capacity with intermittent burning up to: 66 m³

• Efficiency: 84.6%

• Dust based on 13% O2: 15 mg/m³

• CO emission: 1,250 g/m³

• NOX content: 84 mg/Nm³

• Exhaust gas mass flow: 6.4 g/s

• Required. Delivery pressure: 0.12 mbar

• Flue gas temperature: 232 °C

• 2nd stage 1. BImSchV: yes

• Aachener, Düsseldorfer: yes

• Municher, Regensburger: yes

• § 15a B-VG (Austria) yes

• § 1 VKF (Switzerland): yes

• External air supply: yes

• Independent of room air: no

• Automatic: yes

• Flue pipe: 150 mm

• Flue pipe connection height: top 161 cm, rear -/

• External air supply: 125 mm, connections 26.8 cm

• Combustion chamber lining: special ceramic, fine dust filter

• Cast iron trough: yes

• Rigged grate/flat grate: Rigged grate

• Ash container: Drawer below the firebox

• Primary air: Yes

• Secondary air (rear ventilation of the glass): Yes

• Tertiary air: No

• Dimensions: Height 131.5 cm, Width 62 cm, Depth 63 cm

• Weight with ceramic: 285 kg

• Weight with natural stone: 347 kg

• Visible glass dimensions: W x H, 385 x 430 mm

• Clear firebox interior dimensions: W x D x H, 374 x 365 x 470 mm