Flat suction pump SX 350/S HL - versatile pump
| Artikelnummer | WF-119172 |
| Merk | Speroni |
Er zijn nog geen recensies — wees de eerste
Deel je ervaring met deze aankoop en help andere klanten de juiste keuze te makenEr zijn nog geen vragen
Stel een vraag om meer te weten te komen over het productThe pump draws in liquid at a level as low as 1.5 - 2 cm and then pumps out water down to a level of 1 mm, leaving it wipe-dry.
Thanks to the mechanical shaft seal, the pump can run dry for several minutes without sustaining damage.
The suction unit is complete with a reduced connection piece and integrated check valve.
Technical specifications:
- Delivery head: 7 m
- Maximum pressure: 0.7 bar
- Residual pressure at 5 m FH: 0.2 bar
- Delivery rate: 9,000 ltr/h
- Delivery rate at 5 m: 5,400 ltr/h
- Power consumption: 350 watts
- Shaft diameter: from 200 mm
- Connection: 1 1/4" internal thread
- Impeller: plastic
- Grain size: 1 mm
- Shaft and housing: stainless steel
- Cable: 10 m
- Weight: approx. 6 kg
- Voltage: 230 V
- Height: 280 mm
- Min. suction height: 1 mm
The SX 350 SC flat vacuum cleaner is ideal for flat roof renovation, emptying pools, as an emergency pump in the event of flooding, flooded cellars, burst pipes, pond silting, and much more.
| Material | |
|---|---|
| Material | Plastic |
| Material | V2A stainless steel |
| Residual water level (automatic operation) | |
| Residual water level (automatic operation) | 1 mm |
| Output | |
| Output | 350 watts |
| Discharge head | |
| Discharge head | 7 m |
| Connection size | |
| Connection size | 1 1/4 |
| Solids size | |
| Solids size | 1 mm |
| Drive | |
| Drive | 230V motor |
| Technical features | |
| Technical features | flat suction |
| Suction head | |
| Suction head | 15 m |
| Flow rate | |
| Flow rate | 9,000 l/h |
| Voltage | |
| Voltage | 230 volts |
| Cable length | |
| Cable length | 10 m |
| Weight | |
| Weight | 6 kg |
| Maximum pressure | |
| Maximum pressure | 0.7 bar |